SDPC "Stage 3" Camshaft Kit for Gen III Hemi

This camshaft kit requires the MDS (Multi-Displacement System) to be removed and disabled if so equipped. This is a complete cam kit for your manual transmission car or otherwise MDS deleted Hemi.

SDPC has developed a line of camshafts intended to tap into the potential that Dodge left on the table. The stock 5.7 and 6.4 Hemi are no slouch but power falls off hard at higher RPM . Our line of hemi camshafts will not only increase horsepower significantly, but will carry that power throughout the entire powerband.

Our "Stage 3" cam is the ticket if you want to approach 500hp at the flywheel in your 5.7 car or truck and easily surpass 500hp in your 6.4. For 5 speed cars we recommend a 2400+RPM stall converter, or 2800+ if you’re going to hit the drag strip on slicks. 8-speed cars don’t require a torque converter change. This cam picked up 115 horsepower and 54 lb/ft of torque over the stock 5.7 camshaft.

All of our Gen III 2009+ Hemi camshaft kits include:

-The camshaft of your choice, ground on a quality core to SDPC specs by one of the most trusted camshaft manufacturers in the USA

-Matching valve springs, either from PAC Racing or Mopar Performance depending on the camshaft specs and application

-Manley hardened pushrods - 8.100" and 6.800" length.

-SDPC Valve spring retainers for the 5.7, these are not required on the 6.4

-Camshaft phaser lockout with tool

NOTE: It is vital that with any camshaft, lifter, or valvetrain modification that pushrod length is verified at the time of installation. SDPC provides pushrods that are the correct length with Mopar lifters and our camshafts in most applications.

This camshaft kit does not include all of the parts for removing MDS from an MDS enabled engine. If your vehicle has MDS, please see our separate MDS delete kits. They have an option to add this cam kit at a discounted price as a part of the kit.

>>Click here for the MDS Delete Kits!<<

>>Get your HP Tuners Kit Here!!<<

The images shown are for illustration purposes only and may not be an exact representation of the product.