SDPC "Stage 3" Camshaft for Gen III Hemi

SDPC has developed a line of camshafts intended to tap into the potential that Dodge left on the table. The stock 5.7 and 6.4 Hemi are no slouch but power falls off hard at higher RPM . Our line of hemi camshafts will not only increase horsepower significantly, but will carry that power throughout the entire powerband.

Our "Stage 3" cam is the ticket if you want to approach 500hp at the flywheel in your 5.7 car or truck and easily surpass 500hp in your 6.4. For 5 speed cars we recommend a 2400+RPM stall converter, or 2800+ if you’re going to hit the drag strip on slicks. 8-speed cars don’t require a torque converter change. This cam picked up 115 horsepower and 54 lb/ft of torque over the stock 5.7 camshaft.

- This camshaft requires the MDS (Multi-Displacement System) to be removed and disabled.
- It does require additional tuning that we do not provide!
- This camshaft will require a valve spring upgrade!

Dur. @ 0.050”		Lift (1.6 Int & 1.66 Exh Rocker)		LSA
Intake	Exhaust	Intake	Exhaust
223	231	0.596	0.596	111(+2)

 

>>Get your HP Tuners Kit Here!!<<