Chevrolet Performance Connect & Cruise Kit - SP350/357 Turn-Key Crate Engine w/ T56 Manual Transmission
Free Shipping on Connect and Cruise Kits from SDPC, the Number 1 Chevrolet Performance Dealer in the World!
CPS357TKT56
When it comes to factory-engineered performance and convenience, nothing beats Chevrolet Performance's industry exclusive Connect & Cruise SP350/357 Turn-Key w/T56 crate engine kit from Scoggin Dickey Parts Center. With one package you get the engine, transmission, electronic controllers and all the necessary wiring, engine and automatic transmission controllers.
| Engine | SP350/357 Turn-Key |
| Horsepower | 357HP @ 5500RPM |
| Torque | 407FT/LBS @ 4000RPM |
| Compression Ratio | 9.0:1 |
| Block | Cast Iron 4-Bolt Main Caps |
| Crankshaft | Nodular iron, 3.480" |
| Heads | Cast-Iron with 64cc Chambers |
| Valves | 1.94"/1.50" |
| Camshaft Lift | 0.473"/0.473" Hydraulic Roller |
| Dur. @ 0.050" | 215°/223° |
Availability: Will be special ordered for you.
Shipping: FREE SHIPPING ON THIS ITEM Within The Contiguous United States!
Was:
$18,983.51
Sale:
$16,057.51
Save:
15%
Save:
$2,926.00
Description
Components:
Chevrolet Performance engineers matched the engines and transmissions for optimal performance and durability, so you can wring out all the horsepower from them with total confidence. The specially calibrated controllers are designed for retrofit installation in older vehicles, for easier and quicker installation and operation, without the need for third-party tuning.
Some Engine Controller Kits will vary with the small components that are included due to variations in engine applications. Most ECM and Wiring Kits contain the following items;
NOTE: All components, engine, transmission, transmission installation kit, torque converter and controllers are ordered and delivered separately.
| Engine | 19433040 |
|---|---|
| Transmission Install Kit | 19329900 |
| Transmission | 19352208 |
Chevrolet Performance engineers matched the engines and transmissions for optimal performance and durability, so you can wring out all the horsepower from them with total confidence. The specially calibrated controllers are designed for retrofit installation in older vehicles, for easier and quicker installation and operation, without the need for third-party tuning.
Some Engine Controller Kits will vary with the small components that are included due to variations in engine applications. Most ECM and Wiring Kits contain the following items;
- Oxygen Sensors
- O2 Sensor Mounting Bosses
- Mass Air Flow Meter (MAF)
- MAF Mounting Kit
- Drive-By-Wire Throttle Pedal Assembly
- Oil Pressure Sensor and Harness (NOTE: Some crate engines have the the sensor installed from the factory)
- Complete Engine/ECM Wiring Harness with a Fuse Box
- Fuel Pump Power Module
- Fuel Pressure Sensor Kit
- GM Fully Calibrated ECM
- Detailed Instruction Sheet
- Fuel Tank and Lines
- Fuel Pump - 58PSI for LS3, LS7 and 65PSI for LSA
- Front Accessory Drive Components
- Oil Pan Requirements
- Air Induction System
- Exhaust System
NOTE: All components, engine, transmission, transmission installation kit, torque converter and controllers are ordered and delivered separately.
California Proposition 65
WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov
Details
- CPS357TKT56
- CPS357TKT56
- Chevrolet Performance
- Will be special ordered for you.
- New
Shipping Information
- Item Requires Shipping
- 900.0 lbs.
- W48.0000” x H48.0000” x L48.0000”
- Free Shipping!
- FREE SHIPPING ON THIS ITEM Within The Contiguous United States!
Customer Reviews
Total Reviews (0)
You must login to post a review.
California Residents: Prop 65
WARNING: Cancer and Reproductive Harm -
Write the First Review!