HP Tuners COR-ECU-000 - CORE standalone ECU
CORE ECU is HP Tuners’ all-new standalone ECU, currently supporting the legendary Gen 3 and Gen 4 LS platforms.
COR-ECU-000
Built for the gearheads and craftsman who need the utmost level of customization and control, CORE ECU goes beyond the constraints of factory ECUs.
This controller provides all the necessary sensor interfaces, ignition drivers, injection drivers, and output drive stages required for total engine control.
Developed for high-performance applications like:
• Drag Racing
• Circuit Racing
• Drifting
• Rallying/Rallycross
• RestoMods
This controller provides all the necessary sensor interfaces, ignition drivers, injection drivers, and output drive stages required for total engine control.
Developed for high-performance applications like:
• Drag Racing
• Circuit Racing
• Drifting
• Rallying/Rallycross
• RestoMods
Not Available
Availability: Will be special ordered for you.
Pricing:
$1,999.99
Description
CORE ECU FEATURES:
• Up to 16 Injector Control (fuel) and 8 Coil Packs (spark).
• Sequential Injection.
• Flex Fuel Support.
• Dual Throttle Body Capability.
• 2-Built-In Lambda Controllers.
• Internal Data Logging – Up to 150 Channels at 1 kHz
• 3 CAN Bus Networks (2 CAN and 1 HPT Net) and Ethernet Connectivity.
• Boost Control.
• Single-Stage On/Off and Progressive Nitrous Control.
• Launch Control.
• Map Switching.
• A/C Control, Alternator Control, etc.
VCM Live is the software component that brings CORE ECU to life. Combining the diagnostics and calibration elements into a single, user-friendly interface.
• Fully Customize Your Layouts.
• Pre-Defined Layouts for Easy Use.
• Real-Time Tuning and Data Review.
• Wizards For Easy Setup of Popular Sensors, Injectors, and more.
VCM LIVE SOFTWARE SPECIFICATIONS:
• Customizable Time Graphs
• Characteristics List
• Decimal Adjuster
• Templated Basic and Advanced Layouts
• Fully Customizable Layouts
• Standalone Data Logging Up To 1000hz With Start/Top Triggers
• (2) Customizable CAN Configurators
• Engine Protection Like Hard/Soft Limiter Cut Mode, Boost Limits, Etc.
• Ethernet Communications
• Preconfigured Wizards for Injectors, Intakes, Throttle Bodies, Etc.
• Enable/Disable Live Tuning
• Countless Editable Parameters
• Open Multiple Tables at Once
• Table Vertical and Horizontal Specific Smoothing
• Table Interpolating
• Export Feature to View/Modify File via Microsoft Excel (.CSV)
CORE ECU VEHICLE SUPPORT SPECIFICATIONS
CORE ECU is designed for all levels of LS swaps and high-performance motorsports builds. It currently supports Gen 3 and Gen 4 LS engines with a 24x crank and 1x cam trigger along with 58x crank and 4x cam triggers.
Examples of Supported Gen 3 and Gen 4 LS Engines:
LS1, LS6, Early LS2, LS3, LS7, LS9 and LSA
• Up to 16 Injector Control (fuel) and 8 Coil Packs (spark).
• Sequential Injection.
• Flex Fuel Support.
• Dual Throttle Body Capability.
• 2-Built-In Lambda Controllers.
• Internal Data Logging – Up to 150 Channels at 1 kHz
• 3 CAN Bus Networks (2 CAN and 1 HPT Net) and Ethernet Connectivity.
• Boost Control.
• Single-Stage On/Off and Progressive Nitrous Control.
• Launch Control.
• Map Switching.
• A/C Control, Alternator Control, etc.
VCM Live is the software component that brings CORE ECU to life. Combining the diagnostics and calibration elements into a single, user-friendly interface.
• Fully Customize Your Layouts.
• Pre-Defined Layouts for Easy Use.
• Real-Time Tuning and Data Review.
• Wizards For Easy Setup of Popular Sensors, Injectors, and more.
VCM LIVE SOFTWARE SPECIFICATIONS:
• Customizable Time Graphs
• Characteristics List
• Decimal Adjuster
• Templated Basic and Advanced Layouts
• Fully Customizable Layouts
• Standalone Data Logging Up To 1000hz With Start/Top Triggers
• (2) Customizable CAN Configurators
• Engine Protection Like Hard/Soft Limiter Cut Mode, Boost Limits, Etc.
• Ethernet Communications
• Preconfigured Wizards for Injectors, Intakes, Throttle Bodies, Etc.
• Enable/Disable Live Tuning
• Countless Editable Parameters
• Open Multiple Tables at Once
• Table Vertical and Horizontal Specific Smoothing
• Table Interpolating
• Export Feature to View/Modify File via Microsoft Excel (.CSV)
CORE ECU VEHICLE SUPPORT SPECIFICATIONS
CORE ECU is designed for all levels of LS swaps and high-performance motorsports builds. It currently supports Gen 3 and Gen 4 LS engines with a 24x crank and 1x cam trigger along with 58x crank and 4x cam triggers.
Examples of Supported Gen 3 and Gen 4 LS Engines:
LS1, LS6, Early LS2, LS3, LS7, LS9 and LSA
Details
- COR-ECU-000
- COR-ECU-000
- HP Tuners
- Will be special ordered for you.
- New
Shipping Information
- Item Requires Shipping
- 7.0 lbs.
- W9.0000” x H5.0000” x L17.0000”
- Free Shipping!
Customer Reviews
Total Reviews (0)
You must login to post a review.
May We Suggest
California Residents: Prop 65
WARNING: Cancer and Reproductive Harm -
Write the First Review!