ICT Billet 551668-3 - LS Truck - Billet Low Mount Alternator Bracket Kit w/ Pulley

LS Truck Billet Alternator Bracket

Compatible with: truck/SUV (or LS3/L99 Camaro) crank pulley (12634105)
**Alternator: (19244779)(will not fit Corvette/CTSV or 2010 up Camaro large bolt pattern alternators), will fit any other LS powered vehicle alternators with any amperage.145+ amp alternators do not have the provision for the rear bracket.
If needing to extend your alternator harness connection, use ICT# WEALT30-36 (4-pin) or WEALT40-36 (2-pin)
Made in Wichita, Kansas from aerospace grade, USA produced, billet aluminum
Includes:front & rear bracket, idler pulley, and mounting hardware
Belt Length (550K6)

*May require slight grinding on block (see photos) if using a 145/160 amp alternator (105 amp alternator is a direct fit)

**This can only be used on blocks with at least 2 mounting holes on the front of the block. Blocks that only have 1 mounting hole will require drill template 551445 to drill and tap the 2nd M10-1.5mm hole.This hole is in a non-critical part of the block that is away from the cylinder, oil, and water jackets.This bracket only bolts to the front face of the engine block.


This will require a 790K6 (79.0 inch) belt when used with the 551523-3 power steering pump bracket and 105 amp alternator (19244779).For engines without power steering, Use ICT Billet belt kit 551550