Texas Speed & Performance Gen V 5.3L Stage 3 L83TR-3 Camshaft

The Gen5 L83 5.3L engine utilizes Variable Valve Timing (VVT) controlled via a cam phaser. A cam phaser is a computer-controlled cam gear that automatically optimizes camshaft timing based on the current engine RPM. While this technology provides tremendous efficiency benefits, it presents a challenge when designing performance cams due to the wide range of valve timing movement and constantly changing piston-to-valve clearance. With the help of Texas Speed's Superflow 902 engine dyno, they're able to custom-design camshafts and phaser tuning tables to allow Gen5 L83 customers the ability to purchase the ultimate in L83 performance camshafts! Thanks to the Superflow 902 dyno, Texas Speed is the only company that currently offers a VVT camshaft with a phaser table included to properly tune the camshaft phaser once it's installed in your 2014+ L83 truck!

Dur. @ 0.050”		Lift (1.8 Rocker)		LSA
Intake	Exhaust	Intake	Exhaust
222	230	0.635”	0.635”	112

The Texas Speed & Performance L83TR-3 camshaft is a great choice for the enthusiast looking for an additional jump in horsepower without sacrificing any driveability. It will have a lopey idle and will drive best with a higher stall speed. It does remove the factory AFM/DOD system that deactivates cylinders, but it retains the variable valve timing (VVT) system that allows the engine to advance and retard the cam while the engine is running. This provides a much better power curve since the engine can advance the cam in the lower RPM's for better torque and retard the cam in the upper RPM's for better horsepower. We do recommend using the TSP .660" dual spring kit with PAC springs and titanium retainers and TSP hardened chromoly pushrods with this camshaft.

Each GenV L83 camshaft Texas Speed offers will require the use of a Comp Cams Phaser limiter kit. The phaser limiter restricts the range of cam timing movement to 20°. This modification provides the necessary valve clearance for serious performance camshafts with tighter lobe separations while still utilizing the benefits of the VVT technology.

Texas Speed recommends the +32% fuel lobe for any power-adder applications. The +32% fuel lobe will require the use of a lash cap, so please make sure that you install one during the camshaft installation!