Maintenance & Troubleshooting
Signs of Wear & Troubleshooting
- ABS signs of wear include:
- ABS warning light is on, indicating the ABS has been deactivated due to a fault within the system.
- Brake fluid leakage.
- General brake signs of wear include:
- Chirping or grinding noises when braking.
- Difficulty stopping the vehicle.
- A low or sinking brake pedal.
- Brake pedal pulsation (not to be confused with normal ABS operation).
- Vehicle pulls to the left or right when brakes are applied.
Good Maintenance Practices
- The following inspections and maintenance procedures can help prevent potential brake problems.
- Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
- Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
- Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
- Check the thickness of your brake pads.
- The following should be conducted by a qualified technician:
- Inspection of the brake hoses for brittleness or cracking.
- Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
- Inspection of wheel bearings and grease seals.
- Parking brake adjustments (as needed).
WARNING: Cancer & Reproductive Harm - 
Total Reviews (0)
Write the First Review!