MSD 8203 - Blaster 2 Coil w/Ballast & Hardware
Includes a ballast resistor for use with stock style ignitions
8203
Features:
•Improved output coil for stock points or electronic ignitions, Blaster Ignition or MSD 5, 6, and 7 Series
•Supplied with two spark plug wire boots, terminals and a ballast resistor (required if used with stock points ignition)
•100:1 turns ratio and lower primary resistance produce high voltage output
•MSD Red metal canister is filled with a premium grade oil for cooling
•CARB E.O. Approved
•Improved output coil for stock points or electronic ignitions, Blaster Ignition or MSD 5, 6, and 7 Series
•Supplied with two spark plug wire boots, terminals and a ballast resistor (required if used with stock points ignition)
•100:1 turns ratio and lower primary resistance produce high voltage output
•MSD Red metal canister is filled with a premium grade oil for cooling
•CARB E.O. Approved
Availability: Will be special ordered for you.
Pricing:
$59.95
Description
If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD Blaster Ignition, MSD 5, 6 or 7, the Blaster Coil line is the right choice. Our Blaster Coils are designed for improved spark output! Special 100:1 windings are used to provide maximum build-up of voltage! These windings are held secure and kept cool in an oil filled metal canister.
The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. Each Blaster Coil can be used with a stock ignition, Blaster Ignition, MSD 5, 6 or 7 Ignition Control.
Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application. Mallory Unilite applications also require the ballast resistor.
The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. Each Blaster Coil can be used with a stock ignition, Blaster Ignition, MSD 5, 6 or 7 Ignition Control.
Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application. Mallory Unilite applications also require the ballast resistor.
Emission Code
This part is legal for use on Emissions Controlled Vehicles when used in accordance with the manufacturers application guide because it has a California Air Resources Board Executive Order number or is a direct or consolidated replacement part.
The following vehicles are considered Emissions Controlled Vehicles:
1966 and newer U.S. manufactured California Certified vehicles
1968 and newer U.S. manufactured Federally Certified vehicles
1968 and newer Foreign manufactured vehicle
The following vehicles are considered Emissions Controlled Vehicles:
1966 and newer U.S. manufactured California Certified vehicles
1968 and newer U.S. manufactured Federally Certified vehicles
1968 and newer Foreign manufactured vehicle
California Proposition 65
WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov
Details
- 8203
- 8203
- 085132082032
- MSD
- Will be special ordered for you.
- New
Categories
Shipping Information
- Item Requires Shipping
- 2.3 lbs.
- W3.0000” x H4.0000” x L4.0000”
Customer Reviews
Total Reviews (0)
You must login to post a review.
California Residents: Prop 65
WARNING: Cancer and Reproductive Harm -
Write the First Review!