Description
Get a complete modern manual powertrain solution for your restomod, hot rod, or custom truck build with the Ford Performance Gen 4 5.0L Coyote Power Module with 6-Speed Manual Transmission (Part # M-9000-PMCM4). Sourced and engineered directly by Ford Performance, this all-in-one package eliminates swap guesswork by pairing the latest 2024 Mustang GT Gen 4 5.0L Coyote crate engine with a Tremec 6-speed manual transmission.
The 2024 Gen 4 Coyote engine foundation (Part # M-6007-M50D) delivers a factory-rated 480 horsepower at 7,150 RPM and 415 lb.-ft. of torque at 4,900 RPM on premium pump gas, featuring a 12.0:1 compression ratio, lightweight aluminum cylinder block, and forged steel crankshaft. The power module comes fully equipped with the Tremec 6-speed manual transmission (2.66 1st gear), steel QuickTime bellhousing, billet flywheel, clutch kit, Boss 302 alternator kit, starter and index plate, and the dedicated M-6017-M50D Control Pack PCM and installation kit.
Kit Components & Inclusions
- Gen 4 5.0L Coyote Crate Engine (M-6007-M50D): 480 HP @ 7,150 RPM / 415 lb.-ft. torque @ 4,900 RPM, 12.0:1 compression ratio, aluminum block, forged steel crankshaft.
- Tremec 6-Speed Manual Transmission (M-7003-M6266): 2.66 1st gear ratio.
- Steel QuickTime Bellhousing: SFI-rated steel bellhousing.
- Control Pack PCM & Installation Kit (M-6017-M50D): Pre-programmed PCM with Ford Performance calibration, wiring harness, and drive-by-wire accelerator pedal.
- Clutch & Flywheel Package:
- Billet Flywheel (M-6375-G46A)
- Clutch Kit (M-7560-T46)
- Clutch fork and throw-out bearing
- Roller Pilot Bearing (M-7600-B)
- Charging & Starting System:
- Boss 302 Alternator Kit (M-8600-M50BALT)
- Starter and starter index plate
- Hardware & Documentation: Installation hardware package and Coyote Crate Engine Technical Reference Guide.
Product Specifications
| Specification | Detail / Value |
|---|---|
| Part Number | M-9000-PMCM4 |
| Crate Engine Model | M-6007-M50D (Gen 4 5.0L Coyote) |
| Horsepower Output | 480 HP @ 7,150 RPM |
| Torque Output | 415 lb.-ft. @ 4,900 RPM |
| Displacement | 5.0 Liters (302 CID) |
| Bore x Stroke | 93 mm Bore x 92.7 mm Stroke |
| Compression Ratio | 12.0:1 |
| Engine Block Material | Aluminum Block |
| Crankshaft Material | Forged Steel |
| Transmission Type | Tremec 6-Speed Manual Transmission (2.66 1st Gear) - M-7003-M6266 |
| Control Pack Included | M-6017-M50D Control Pack PCM & Installation Kit |
| Alternator Kit Included | M-8600-M50BALT (Boss 302 Alternator Kit) |
| Fuel Requirement | Runs on Premium Pump Gas |
| Part Type | Engine: Complete Engines / Powertrain Packages |
| Shipping Configuration | Ships in 2 Boxes |
| Package Dimensions & Weights |
Box 1: 36" x 44" x 36" (700 lbs) Box 2: 48" x 42" x 35" (700 lbs) |
| UPC Code | 756122024843 |
| Sold In Units Of | Each (1) |
Application Notes
- Direct Modular Drivetrain Solution: Engineered to simplify the installation of the 2024 Gen 4 Coyote engine and Tremec 6-speed manual transmission into classic Mustangs, hot rods, and custom vehicle builds.
- Plug-and-Play Electronics: Includes the complete engine controller and wiring harness (Control Pack M-6017-M50D) designed to eliminate custom swap wiring complexity.
Details
Shipping Information
- H86.00"